Deep Groove Ball Bearings

Deep Groove Ball Bearings

Low-Friction Bearings for High-Speed Radial and Combined Loads

Bearing Type: Deep Groove Ball Bearing
Product Category: Large Size Ball Bearings
Primary Load: Radial load
Axial Load: Limited axial load in both directions
Locating Function: Bidirectional axial location
Friction: Low friction coefficient.

Technical Specifications

SpecificationDetails
Bearing TypeDeep Groove Ball Bearing
Product CategoryLarge Size Ball Bearings
Primary LoadRadial load
Axial LoadLimited axial load in both directions
Locating FunctionBidirectional axial location
FrictionLow friction coefficient
Speed CapabilityHigh limiting speed
Permissible Misalignment2-10 arcmin; bearing life may be affected
Impact LoadNot recommended
Heavy LoadNot recommended
Cage OptionsMachined brass, solid steel or reinforced nylon 66

Deep Groove Ball Bearings Overview

Deep groove ball bearings are among the most widely used rolling bearings. Their simple structure, ease of installation and reliable operation make them suitable for a broad range of machinery. They primarily carry radial loads and can also support limited axial loads when the shoulder geometry and radial clearance are appropriately selected.

Compared with other bearing types of similar size, deep groove ball bearings provide a low friction coefficient and high limiting speed. Within their axial clearance, they can limit shaft or housing displacement in both directions and therefore act as bidirectional locating bearings.

Low Friction and High-Speed Performance

The deep raceway geometry provides stable ball guidance and efficient rolling contact. This helps reduce frictional losses and heat generation, supporting smooth operation at relatively high rotational speeds under suitable load and lubrication conditions.

  • Simple and reliable structure
  • Low friction coefficient
  • High limiting speed
  • Easy installation and use

Bidirectional Location and Load Limitations

The bearing can carry radial load together with limited axial load in either direction and can locate a shaft axially on both sides. It has a small self-aligning allowance of about 2-10 arcminutes, but misalignment may shorten service life. Deep groove ball bearings are not impact-resistant and are not recommended for heavy-load duty.

  • Primarily designed for radial load
  • Limited axial load in both directions
  • Avoid shock and heavy-load duty

Bearing Structure Types-6

Deep groove ball bearing structure and principal dimensions

Bearing Structure and Cage Options

OptionConfigurationSelection Guidance
Open DesignDeep-groove inner and outer racewaysStandard arrangement for high-speed radial-load applications
Brass CageMachined solid brass cageCommon CHG cage configuration
Steel CageSolid steel cageMetallic alternative selected by operating requirements
Nylon 66 CageReinforced engineering-plastic cageCage material is identified by the bearing suffix

Performance and Mounting Characteristics

After mounting, the bearing can provide bidirectional axial location within its designed clearance. Shaft and housing alignment should be controlled carefully: although slight inclination may be tolerated, excessive misalignment changes the contact condition and can reduce bearing life. Correct fits, lubrication and load control are essential for high-speed service.

Permissible misalignment : 2-10 arcmin (bearing life may be reduced )

Typical Applications

  • Automotive systems
  • Tractors and agricultural machinery
  • Machine tools
  • Electric motors
  • Pumps
  • Textile machinery

Available Models & Specifications

Part Number Part Numberd (mm) d (")D (mm) D (")B (mm) B (")C₀r (kN) C₀r (klbf)Cr (kN) Cr (klbf)Mass (kg) Mass (lb)
G4996741N 65175381251615.1
61914-2R 701001620.122.50.396
MJ3 1/4 82.55190.5539.6982.91146.37
6101805ZZ 90191521021346.54
61818 901151320.519.50.282
61818X3 901201020.519.50.295
6218 901603071.5962.22
6318ZZMB 90190431021346.24
61819 951201321.319.80.297
16020MB 1001501644.745.31.07

Similar Models