Double Row Angular Contact Ball Bearings

Double Row Angular Contact Ball Bearings

Rigid Bidirectional Locating Bearings for Combined Loads and Moments

Bearing Type: Double Row Angular Contact Ball Bearing
Bore Diameter: 100-340 mm
Contact Angle: Usually 40 degrees
Primary Load: Radial-dominant combined radial and axial load
Axial Load: Bidirectional
Moment Load: Capable of carrying tilting moments.

Technical Specifications

SpecificationDetails
Bearing TypeDouble Row Angular Contact Ball Bearing
Bore Diameter100-340 mm
Contact AngleUsually 40 degrees
Primary LoadRadial-dominant combined radial and axial load
Axial LoadBidirectional
Moment LoadCapable of carrying tilting moments
Locating FunctionBidirectional axial location
SeparabilityNon-separable
MaterialChrome steel or stainless steel
LubricationGrease or oil
SealingSealed or open

Double Row Angular Contact Ball Bearings Overview

The basic design of a double row angular contact ball bearing is similar to two single row angular contact ball bearings arranged back-to-back, but with a smaller axial envelope. The integrated double row construction provides good rigidity and a compact locating solution.

These non-separable bearings carry radial-dominant combined radial and axial loads, axial loads in both directions and tilting moments. They can limit axial displacement of the shaft or housing in both directions and are suitable for locating both ends of a roll. The contact angle is usually 40 degrees.

High Rigidity and Combined-Load Capacity

The two rows of balls act together through opposed contact lines. This arrangement increases system rigidity and enables simultaneous support of radial load, bidirectional axial load and moment load, with performance comparable to a back-to-back pair of single row angular contact bearings.

  • Compact double row construction
  • High bearing-system rigidity
  • Bidirectional axial load capacity
  • Tilting moment capacity

Bidirectional Location and Alignment Control

The bearing can locate a shaft or housing axially in both directions. Its permissible angular misalignment is limited and depends on internal clearance, bearing size, internal design and the forces and moments acting on the bearing. Excessive inclination reduces running accuracy, increases noise and can cause premature failure.

  • Locates in both axial directions
  • Usually 40-degree contact angle
  • Strict shaft and housing alignment required

Bearing Structure Types-7

Structural Types and Principal Dimensions

TypeSeriesStructure
00000 Type3056000 TypeIntegrated double row angular contact design
00000 D Type86000 TypeD-type double row angular contact design

Mounting and Operating Considerations

Because angular misalignment capacity is limited, shaft and housing seats should be accurately machined and aligned. The selected clearance, fit, lubrication and sealing arrangement should match bearing size and loading. Avoid excessive deflection or housing-seat error that would disturb the intended contact pattern.

Typical contact angle: 40 degrees

Typical Applications and Arrangements

  • Roll-end locating positions
  • Radial-axial combined-load supports
  • Bidirectional axial locating arrangements
  • Moment-load bearing positions
  • Compact high-rigidity supports
  • Back-to-back pair replacement arrangements

Available Models & Specifications

Part Number Part Numberd (mm) d (")D (mm) D (")B (mm) B (")Weight (kg) Weight (lb)
120BDZ1901E4 120190666.5
305256 120190666.5
4024X3D 120190666.5
4024X3DHE/W33 120190667.21
7024B/DF 120180564.97
86724X3 120190667.29
4026 130200667.42
7026ADFCA130 130200666.22
7026C/DF 130200667.39
AC2821BDF 130205483.24

Similar Models