Manufactured by CHG Bearing, the HRE40035 is a precision HRE Series Crossed Roller Bearings. Key dimensional parameters include a 400 mm bore diameter, a 480 mm outer diameter, and a 35 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HRE40035 - HRE Series Crossed Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HRE40035 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Crossed Roller Bearing |
| Series | HRE |
| Design Type | Split Inner Ring |
| Seal Type | Single-sided or Double-sided Sealed |
| Dimensions | |
| Roller Pitch Circle Diameter dp | 440.3 mm |
| Bore Diameter (d) | 400 mm |
| Width (B) | 35 mm |
| Outer Diameter (D) | 480 mm |
| Minimum Chamfer Dimension rmin | 2.5 mm |
| Inner Ring Shoulder Diameter ds | 422 mm |
| Outer Ring Shoulder Diameter Dh | 459 mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 156 kN |
| Basic Static Radial Load Rating C0r (kN) | 370 kN |
| Reference Data | |
| Reference Mass (kg) | 14.5 kg |
HRE40035 480 mm 400 mm 35 mm Frequently Asked Questions about HRE40035 HRE Series Crossed Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Single-sided or Double-sided Sealed), CHG Bearing pre-charges HRE40035 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Each HRE40035 produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit (400 mm bore side) ensures perfect planar contact without edge binding.
Every production batch of CHG Bearing HRE40035 HRE Series Crossed Roller Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
As a primary manufacturer, CHG Bearing supports both trial batch evaluations and container-load supply for HRE40035. Standard catalog sizes are stocked for rapid 3–7 day dispatch, while high-volume OEM production runs typically dispatch within 30–45 days.
