Manufactured by CHG Bearing, the 618/670P4 is a precision Deep Groove Ball Bearings（618 / 619 SERIES）. Key dimensional parameters include a 670 mm bore diameter, a 820 mm outer diameter, and a 69 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
618/670P4 - Deep Groove Ball Bearings（618 / 619 SERIES）
Technical Specifications
| Overview | |
|---|---|
| Part Number | 618/670P4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Deep Groove Ball Bearing |
| Seal Type | Open / Contact Seal Options |
| Load Direction | Radial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 670 mm |
| Width (B) | 69 mm |
| Outer Diameter (D) | 820 mm |
| Bore Diameter Tolerance | / mm |
| Outside Diameter Tolerance | / mm |
| Width Tolerance | / mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr (kN) | 435 kN |
| Basic Static Radial Load Rating C0r (kN) | 965 kN |
| Limiting Speed – Grease (r/min) | 560 r/min |
| Limiting Speed – Oil (r/min) | 670 (r/min) |
| Material | |
| Mass (kg) | 75.4 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C |
| Precision Class | P4 |
| Radial Internal Clearance | 0.110-0.260 mm |
618/670P4 820 mm 670 mm 69 mm Frequently Asked Questions about 618/670P4 Deep Groove Ball Bearings（618 / 619 SERIES）
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting 618/670P4 over a 670 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To extend the trouble-free lifespan of CHG Bearing 618/670P4, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
Yes, 100% of 618/670P4 Deep Groove Ball Bearings（618 / 619 SERIES） leaving CHG Bearing production lines are subjected to multi-frequency Anderometer sound testing. All units satisfy baseline Z1V1 levels, with dedicated quiet-running electric motor quality (EMQ) lots certified to Z2V2 and Z3V3 standards for silent machinery integration.
In its sealed configuration (Open / Contact Seal Options), CHG Bearing pre-charges 618/670P4 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
