Manufactured by CHG Bearing, the 71901 is a precision Angular Contact Ball Bearings（718 / 719 SERIES）. Key dimensional parameters include a 12 mm bore diameter, a 24 mm outer diameter, and a 6 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
Technical Specifications
| Overview | |
|---|---|
| Part Number | 71901 71901 |
| Brand | CHG® CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing Angular Contact Ball Bearing |
| Series | 719 719 |
| Seal Type | Open / Contact Seal Options Open / Contact Seal Options |
| Load Direction | Radial Radial |
| Row Configuration | Single Row Single Row |
| Dimensions | |
| Bore Diameter (d) | 12 mm |
| Width (B) | 6 mm |
| Outer Diameter (D) | 24 mm |
| Bore Diameter Tolerance | -0.008-0 mm |
| Outside Diameter Tolerance | -0.009-0 mm |
| Width Tolerance | -0.12-0 mm |
| Performance | |
| Basic Dynamic Radial Load Rating Cr | 32 kN 7.19 klbf |
| Basic Static Radial Load Rating C0r | 1.77 kN 0.4 klbf |
| Limiting Speed – Grease | 38000 r/min 38000 r/min |
| Limiting Speed – Oil | 53000 (r/min) 53000 (r/min) |
| Material | |
| Mass | 0.011 kg 0.0243 lb |
| Ring Material | Stainless Steel / Bearing Steel Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range | -50 to +100 °C -50 to +100 °C |
| Precision Class | P0 P0 |
| Radial Internal Clearance | 0.003-0.018 mm |
71901 24 mm 12 mm 6 mm Frequently Asked Questions about 71901 Angular Contact Ball Bearings（718 / 719 SERIES）
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The Open / Contact Seal Options engineered for 71901 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
The CHG Bearing 71901 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing 71901 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
Every production batch of CHG Bearing 71901 Angular Contact Ball Bearings（718 / 719 SERIES） comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
