Four-Row Cylindrical Roller Bearings

FC202890 - Four-Row Cylindrical Roller Bearings

Manufactured by CHG Bearing, the FC202890 is a precision Four-Row Cylindrical Roller Bearings. Key dimensional parameters include a 100 mm bore diameter, a 140 mm outer diameter, and a 90 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.

WhatsApp

Technical Specifications

Overview
Part NumberFC202890 FC202890
BrandCHG® CHG®
Characteristics
Bearing TypeFour Row Cylindrical Roller Bearing Four Row Cylindrical Roller Bearing
Number of RowsFour Row Four Row
Tolerance ClassP0 P0
Dimensions
Bore Diameter (d)100 mm
Width (B)90 mm
Outer Diameter (D)140 mm
Bore Diameter Tolerance-0.020 – 0 mm
Outside Diameter Tolerance-0.018 – 0 mm
Width Tolerance-0.20 – 0 mm
Enveloping Circle Diameter (Fw)111 mm
Inner Ring Chamfer (min.)1.5 mm
Outer Ring Chamfer (min.)1.5 mm
Lubrication Groove Width6.5 mm
Performance
Basic Dynamic Load Rating (Cr)290 kN 65.19 klbf
Basic Static Load Rating (C₀r)616 kN 138.48 klbf
Material
Ring MaterialBearing Steel Bearing Steel
Rolling Element MaterialBearing Steel Bearing Steel
Cage MaterialBrass Brass
Properties
Mass4.28 kg 9.4358 lb
Lubrication Holes (qty × Ø mm)4 × Ø4 4 × Ø4
CAD Drawing and Dimensions for FC202890 Four-Row Cylindrical Roller Bearings FC202890 140 mm 100 mm 90 mm 111 mm

Frequently Asked Questions about FC202890 Four-Row Cylindrical Roller Bearings

Find key technical answers regarding dimensions, specifications, and replacement options for this model.

When fitting FC202890 over a 100 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
As standard production, CHG Bearing subjects FC202890 to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
In its sealed configuration (Open Type), CHG Bearing pre-charges FC202890 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To match diverse operational dynamics, CHG Bearing supplies FC202890 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
FC202890 - Four-Row Cylindrical Roller Bearings CAD Drawing FC202890 140 mm 100 mm 90 mm 111 mm