Four-Row Tapered Roller Bearings

77928 - Four-Row Tapered Roller Bearings

Manufactured by CHG Bearing, the 77928 is a precision Four-Row Tapered Roller Bearings. Key dimensional parameters include a 139.7 mm bore diameter, a 200.025 mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.

WhatsApp

Technical Specifications

Overview
Part Number77928 77928
BrandCHG® CHG®
Characteristics
Bearing TypeFour Row Tapered Roller Bearing Four Row Tapered Roller Bearing
Number of RowsFour Row Four Row
Tolerance ClassClass 4 Class 4
Dimensions
Bore Diameter (d)139.7 mm
Outer Diameter (D)200.025 mm
Bore Diameter Tolerance0 – +0.025 mm
Outside Diameter Tolerance0 – +0.025 mm
Inner Ring Chamfer (min.)0.8 min mm
Outer Ring Chamfer (min.)3.3 min mm
Inner Ring Assembly Width Tolerance-0.5 – +0.5 mm
Outer Ring Assembly Width (C)160.338 mm
Outer Ring Assembly Width Tolerance-0.5 – +0.5 mm
Shaft Abutment Diameter151 mm
Housing Abutment Diameter185 mm
Lubrication Hole Diameter4 mm
Lubrication Groove Width9.5 mm
Inner Ring Assembly Width (T)157.162 mm
Performance
Basic Dynamic Radial Load Rating (Cr)715 kN 160.74 klbf
Basic Static Load Rating (C₀r)1690 kN 379.93 klbf
Material
Ring MaterialBearing Steel Bearing Steel
Rolling Element MaterialBearing Steel Bearing Steel
Cage Material08Al Steel 08Al Steel
Properties
Mass15.4 kg 33.9512 lb
CAD Drawing and Dimensions for 77928 Four-Row Tapered Roller Bearings 77928 200.025 mm 139.7 mm 157.162 mm

Frequently Asked Questions about 77928 Four-Row Tapered Roller Bearings

Find key technical answers regarding dimensions, specifications, and replacement options for this model.

Built for demanding industrial environments, the 77928 Four-Row Tapered Roller Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
When fitting 77928 over a 139.7 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Every production batch of CHG Bearing 77928 Four-Row Tapered Roller Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
The CHG Bearing 77928 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
77928 - Four-Row Tapered Roller Bearings CAD Drawing 77928 200.025 mm 139.7 mm 157.162 mm