Spherical Roller Thrust Bearings

Spherical Roller Thrust Bearings

Self-Aligning High-Capacity Bearings for Axial-Dominant Combined Loads

Bearing Type: Spherical Roller Thrust Bearing
Size Range: d 150-1250 mm; D 215-1800 mm; 4.7-2770 kg
Series: 290000 Type (39000 Series)
Primary Load: Axial-dominant combined radial and axial load
Axial Load: Single-direction axial load
Self-Alignment: Compensates for shaft, housing and mounting errors.

Spherical Roller Thrust Bearings Overview

Spherical roller thrust bearings carry axial-dominant combined radial and axial loads and can also support axial load in one direction. Their high load capacity, relatively high limiting speed and self-aligning capability make them suitable for demanding thrust-bearing positions.

When shaft or housing manufacturing accuracy is limited, or when installation error causes angular misalignment, the spherical raceway allows the bearing to align itself without preventing normal operation. Standard designs normally use pressed steel cages or machined solid cages.

Self-Alignment and Combined-Load Capacity

The raceway curvature enables the roller set to adjust to angular deviation between shaft and housing. At the same time, the contact geometry provides high capacity for axial-dominant combined loads and single-direction axial location, improving reliability when mounting accuracy or structural deflection cannot be fully eliminated.

  • Automatic compensation of angular misalignment
  • Axial-dominant combined-load capacity
  • Single-direction axial load capacity
  • Suitable for installation and manufacturing errors

High Capacity and Speed Performance

The asymmetrical spherical rollers and raceways create a robust load path for heavy thrust service while maintaining good operating speed. Proper preload or clearance, lubrication and heat control are required to realize the specified load and speed capability under combined loading.

  • High load-carrying capacity
  • Relatively high limiting speed
  • Stable performance under combined loads
Spherical Roller Thrust Bearings

Spherical roller thrust bearing principal dimensions

Technical Specifications

SpecificationDetails
Bearing TypeSpherical Roller Thrust Bearing
Size Ranged 150-1250 mm; D 215-1800 mm; 4.7-2770 kg
Series290000 Type (39000 Series)
Primary LoadAxial-dominant combined radial and axial load
Axial LoadSingle-direction axial load
Self-AlignmentCompensates for shaft, housing and mounting errors
Speed CapabilityHigh limiting speed
MaterialGCr15 or G20Cr2Ni4A
CagePressed steel or machined solid cage
Temperature, Sealing & LubricationUp to 200°C; contact or non-contact seals; grease or oil
CertificationsISO 9001, ISO 14001

290000 Type Structure and Cage Options

OptionConfigurationSelection Guidance
290000 Type39000 Series self-aligning thrust designFor axial-dominant combined loading
Pressed CagePressed steel cageStandard lightweight metallic option
Solid CageMachined solid cageSelected for size and operating requirements

Mounting and Operating Considerations

Although the bearing can compensate for angular misalignment, shaft and housing seats should still be manufactured and installed accurately. Select cage, sealing and lubrication according to load, speed and temperature. Confirm the intended axial load direction and provide adequate heat dissipation for heavy-duty service.

Bore diameter range: 150-1250 mm

Typical Applications

  • Oil-drilling rigs
  • Ocean-going freighter propeller shafts
  • Roadheaders and tunnelling machines
  • Gantry cranes
  • Large tower-crane turntables
  • Drilling-machine turntables

Models & Specifications

Part Number Part NumberD (mm) D (")d (mm) d (")C₀a (kN) C₀a (klbf)Ca (kN) Ca (klbf)Mass (kg) Mass (lb)
29230 21515014403674.7
29330 250150256077711
29430 3001504590144928
29332 270160310591014.5
29432 3201605040161033.5
29334 280170320094515
29434 3401705900182044.5
29236 25018018304456.4
29336 3001803870111619.5
29436 3601806600202552.5

Similar Models