Tapered Roller Thrust Bearings

Tapered Roller Thrust Bearings

High-Capacity Bearings for Single- and Double-Direction Axial Loads

Bearing Type: Tapered Roller Thrust Bearing
Size Range: d 200-380 mm; D 400-670 mm; 75-274 kg
Design Types: Single-direction 90000 Type (19000 Series); double-direction arrangement
Primary Load: High axial load
Locating Function: Single-direction axial location for standard design.

Tapered Roller Thrust Bearings Overview

Standard single-direction tapered roller thrust bearings carry axial load in one direction only and limit axial displacement of the shaft in the same direction, making them suitable as single-direction axial locating bearings.

Compared with cylindrical roller thrust bearings, their tapered contact geometry provides higher load capacity and less relative sliding, but the limiting speed is lower. Double-direction arrangements shown in the structure figure use opposed rows to support thrust in both directions.

High Axial Capacity and Locating Function

The tapered rollers and raceways form a rigid load path for demanding thrust positions. The standard single-direction design supports heavy axial load and accurately controls axial movement in one direction, while the double-direction arrangement extends axial support to both directions.

High axial load capacity

  • Single-direction axial location
  • Higher capacity than cylindrical thrust bearings
  • Rigid tapered roller contact

Sliding, Speed and Cage Characteristics

Tapered contact reduces relative sliding compared with cylindrical roller thrust designs, but these bearings remain intended for moderate- or low-speed thrust service. Solid steel or brass cages are normally selected according to bearing size, load, temperature and lubrication conditions.

  • Lower relative sliding
  • Lower limiting speed
  • Solid steel or brass cage

tapered roller thrust bearings

Single- and double-direction tapered roller thrust bearing structures

Technical Specifications

SpecificationDetails
Bearing TypeTapered Roller Thrust Bearing
Size Ranged 200-380 mm; D 400-670 mm; 75-274 kg
Design TypesSingle-direction 90000 Type (19000 Series); double-direction arrangement
Primary LoadHigh axial load
Locating FunctionSingle-direction axial location for standard design
Load ComparisonHigher capacity than cylindrical roller thrust bearings
Sliding & SpeedLower relative sliding; lower limiting speed
MaterialGCr15 or G20Cr2Ni4A
CageSolid steel or brass cage
Temperature & PrecisionUp to 150°C (302°F); P0/P6/P5/P4 customizable
LubricationGrease or oil

Single- and Double-Direction Structures

OptionConfigurationSelection Guidance
Single-Direction90000 Type (19000 Series)One-direction thrust and axial location
Double-DirectionOpposed double-row thrust structureSupports thrust in both directions
Cage OptionsSolid steel or brassSelect by load, temperature and lubrication

Mounting and Operating Considerations

Confirm the required thrust direction before mounting and keep bearing washers correctly aligned. Use the specified grease or oil supply and control operating temperature. Because limiting speed is relatively low, verify speed, lubrication and heat dissipation for continuous service.

Bore diameter range: 200-380 mm

Typical Applications

  • Construction machinery
  • Automotive systems
  • Power-generation equipment
  • Single-direction axial locating positions
  • High axial-load machinery
  • Low-speed thrust-bearing positions

Models & Specifications

Part Number Part Numberd (mm) d (")D (mm) D (")T (mm) T (")D₁ D₁d₁ d₁Mass (kg) Mass (lb)
350980C 1702408418412.5
353162 1802809019621
563400 2003009623620
99440 200400122200.340075
91742 210460122210.3460107
91742DS 210460150210.3460134
351019C 2203009623619.5
530852 230400180260110
351182C 2403209625621.5
545678 24038010527042

Similar Models