Manufactured by CHG Bearing, the 100*120 is a precision Cylindrical Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
100*120 - Cylindrical Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 100*120 |
| Brand | CHG® |
| Product Type | Cylindrical Roller |
| Dimensions | |
| Roller Diameter, Dw | 100 mm |
| Roller Length, Lw | 120 mm |
| Center Recess Diameter | 40 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 2 mm |
| Dimensional & Geometrical Accuracy | |
| Roller Diameter Tolerance | -0.018 to +0.006 mm |
| Roller Length Tolerance | -0.2-0.05 mm |
| Through-hole Runout | - mm |
| End-face Runout | 0.006 mm |
| Diameter Variation Between Ends | 0.002 mm |
| Roundness | 0.0013 mm |
| Ovality | - mm |
| Surface Finish | |
| Outside Diameter Surface Roughness, Ra (µm) | 0.16 µm |
| End-face Surface Roughness, Ra (µm) | 0.25 µm |
| Chamfer Geometry | |
| Axial Chamfer | 2.5 mm |
| Axial Chamfer Tolerance | -0.8 to +0.8 mm |
| Radial Chamfer | 2.5 mm |
| Radial Chamfer Tolerance | -0.8 to +0.8 mm |
100*120 100 mm 120 mm Frequently Asked Questions about 100*120 Cylindrical Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The CHG Bearing 100*120 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
To ensure optimum performance of CHG Bearing 100*120 Cylindrical Rollers under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the mm bore. For the mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Every production batch of CHG Bearing 100*120 Cylindrical Rollers comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
The Open Type engineered for 100*120 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
