Manufactured by CHG Bearing, the 25*50 is a precision Cylindrical Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
25*50 - Cylindrical Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 25*50 |
| Brand | CHG® |
| Product Type | Cylindrical Roller |
| Dimensions | |
| Roller Diameter, Dw | 25 mm |
| Roller Length, Lw | 50 mm |
| Center Recess Diameter | 12 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1 mm |
| Dimensional & Geometrical Accuracy | |
| Roller Diameter Tolerance | -0.01-0.003 mm |
| Roller Length Tolerance | -0.013 to -0.003 mm |
| Through-hole Runout | - mm |
| End-face Runout | 0.01 mm |
| Diameter Variation Between Ends | 0.002 mm |
| Roundness | 0.0015 mm |
| Ovality | 0.0015 mm |
| Surface Finish | |
| Outside Diameter Surface Roughness, Ra (µm) | 0.14 µm |
| End-face Surface Roughness, Ra (µm) | 0.25 µm |
| Chamfer Geometry | |
| Axial Chamfer | 0.8 mm |
| Axial Chamfer Tolerance | -0.2 to +0.2 mm |
| Radial Chamfer | 0.8 mm |
| Radial Chamfer Tolerance | -0.2 to +0.2 mm |
25*50 25 mm 50 mm Frequently Asked Questions about 25*50 Cylindrical Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To match diverse operational dynamics, CHG Bearing supplies 25*50 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
The CHG Bearing 25*50 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Model 25*50 is manufactured by CHG Bearing in standard Normal clearance (CN) for ambient temperature transmission, and C3 or C4 clearance for heavy duty applications. C3 clearance compensates for radial shrinkage caused by tight shaft press-fits (bore mm) and steep thermal gradients between inner and outer rings.
The Open Type engineered for 25*50 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
