Manufactured by CHG Bearing, the 26*45 is a precision Cylindrical Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
26*45 - Cylindrical Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 26*45 |
| Brand | CHG® |
| Product Type | Cylindrical Roller |
| Dimensions | |
| Roller Diameter, Dw | 26 mm |
| Roller Length, Lw | 45 mm |
| Center Recess Diameter | 12 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1 mm |
| Dimensional & Geometrical Accuracy | |
| Roller Diameter Tolerance | -0.01-0.003 mm |
| Roller Length Tolerance | -0.013 to -0.003 mm |
| Through-hole Runout | - mm |
| End-face Runout | 0.008 mm |
| Diameter Variation Between Ends | 0.002 mm |
| Roundness | 0.001 mm |
| Ovality | 0.001 mm |
| Surface Finish | |
| Outside Diameter Surface Roughness, Ra (µm) | 0.125 µm |
| End-face Surface Roughness, Ra (µm) | 0.22 µm |
| Chamfer Geometry | |
| Axial Chamfer | 0.8 mm |
| Axial Chamfer Tolerance | -0.2 to +0.2 mm |
| Radial Chamfer | 0.8 mm |
| Radial Chamfer Tolerance | -0.2 to +0.2 mm |
26*45 26 mm 45 mm Frequently Asked Questions about 26*45 Cylindrical Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Quality starts with raw material selection: CHG Bearing crafts 26*45 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
Every production batch of CHG Bearing 26*45 Cylindrical Rollers comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
When fitting 26*45 over a mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
The CHG Bearing 26*45 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
