Manufactured by CHG Bearing, the 30*48 is a precision Cylindrical Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
30*48 - Cylindrical Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 30*48 |
| Brand | CHG® |
| Product Type | Cylindrical Roller |
| Dimensions | |
| Roller Diameter, Dw | 30 mm |
| Roller Length, Lw | 48 mm |
| Center Recess Diameter | 14 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1 mm |
| Dimensional & Geometrical Accuracy | |
| Roller Diameter Tolerance | -0.02-0.005 mm |
| Roller Length Tolerance | -0.04 to 0 mm |
| Through-hole Runout | - mm |
| End-face Runout | 0.006 mm |
| Diameter Variation Between Ends | 0.002 mm |
| Roundness | 0.0015 mm |
| Ovality | 0.0015 mm |
| Surface Finish | |
| Outside Diameter Surface Roughness, Ra (µm) | 0.16 µm |
| End-face Surface Roughness, Ra (µm) | 0.25 µm |
| Chamfer Geometry | |
| Axial Chamfer | 1.2 mm |
| Axial Chamfer Tolerance | -0.2 to +0.2 mm |
| Radial Chamfer | 1.2 mm |
| Radial Chamfer Tolerance | -0.2 to +0.2 mm |
30*48 30 mm 48 mm Frequently Asked Questions about 30*48 Cylindrical Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting 30*48 over a mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To ensure optimum performance of CHG Bearing 30*48 Cylindrical Rollers under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the mm bore. For the mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
As a primary manufacturer, CHG Bearing supports both trial batch evaluations and container-load supply for 30*48. Standard catalog sizes are stocked for rapid 3–7 day dispatch, while high-volume OEM production runs typically dispatch within 30–45 days.
The CHG Bearing 30*48 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
