Manufactured by CHG Bearing, the 45*82 is a precision Cylindrical Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
45*82 - Cylindrical Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 45*82 |
| Brand | CHG® |
| Product Type | Cylindrical Roller |
| Dimensions | |
| Roller Diameter, Dw | 45 mm |
| Roller Length, Lw | 82 mm |
| Center Recess Diameter | 24 mm |
| Through-hole Diameter | 12 mm |
| Center Recess Depth | 1.5 mm |
| Dimensional & Geometrical Accuracy | |
| Roller Diameter Tolerance | -0.01-0.003 mm |
| Roller Length Tolerance | -0.02 to -0.01 mm |
| Through-hole Runout | 0.03 mm |
| End-face Runout | 0.01 mm |
| Diameter Variation Between Ends | 0.002 mm |
| Roundness | 0.001 mm |
| Ovality | 0.001 mm |
| Surface Finish | |
| Outside Diameter Surface Roughness, Ra (µm) | 0.125 µm |
| End-face Surface Roughness, Ra (µm) | 0.22 µm |
| Chamfer Geometry | |
| Axial Chamfer | 1.8 mm |
| Axial Chamfer Tolerance | -0.2 to +0.2 mm |
| Radial Chamfer | 1.8 mm |
| Radial Chamfer Tolerance | -0.2 to +0.2 mm |
45*82 45 mm 82 mm Frequently Asked Questions about 45*82 Cylindrical Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open Type), CHG Bearing pre-charges 45*82 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To ensure optimum performance of CHG Bearing 45*82 Cylindrical Rollers under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the mm bore. For the mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
When fitting 45*82 over a mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Sourcing 45*82 directly from CHG Bearing eliminates intermediate brokerage markups while granting you factory-direct engineering backup, rigorous ISO-certified quality assurance, competitive volume wholesale pricing, and dependable supply chain stability for Cylindrical Rollers.
