Manufactured by CHG Bearing, the 70*125 is a precision Cylindrical Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
70*125 - Cylindrical Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 70*125 |
| Brand | CHG® |
| Product Type | Cylindrical Roller |
| Dimensions | |
| Roller Diameter, Dw | 70 mm |
| Roller Length, Lw | 125 mm |
| Center Recess Diameter | 32 mm |
| Through-hole Diameter | 19 mm |
| Center Recess Depth | 2 mm |
| Dimensional & Geometrical Accuracy | |
| Roller Diameter Tolerance | -0.01-0.003 mm |
| Roller Length Tolerance | -0.02 to -0.01 mm |
| Through-hole Runout | 0.03 mm |
| End-face Runout | 0.01 mm |
| Diameter Variation Between Ends | 0.002 mm |
| Roundness | 0.0015 mm |
| Ovality | 0.0015 mm |
| Surface Finish | |
| Outside Diameter Surface Roughness, Ra (µm) | 0.14 µm |
| End-face Surface Roughness, Ra (µm) | 0.22 µm |
| Chamfer Geometry | |
| Axial Chamfer | 2.5 mm |
| Axial Chamfer Tolerance | -0.2 to +0.2 mm |
| Radial Chamfer | 2.5 mm |
| Radial Chamfer Tolerance | -0.2 to +0.2 mm |
70*125 70 mm 125 mm Frequently Asked Questions about 70*125 Cylindrical Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To match diverse operational dynamics, CHG Bearing supplies 70*125 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
When fitting 70*125 over a mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Built for demanding industrial environments, the 70*125 Cylindrical Rollers by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
Every production batch of CHG Bearing 70*125 Cylindrical Rollers comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
