Manufactured by CHG Bearing, the 75*135.5 is a precision Cylindrical Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
75*135.5 - Cylindrical Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 75*135.5 |
| Brand | CHG® |
| Product Type | Cylindrical Roller |
| Dimensions | |
| Roller Diameter, Dw | 75 mm |
| Roller Length, Lw | 135.5 mm |
| Center Recess Diameter | 35 mm |
| Through-hole Diameter | 22 mm |
| Center Recess Depth | 2 mm |
| Dimensional & Geometrical Accuracy | |
| Roller Diameter Tolerance | -0.01-0.003 mm |
| Roller Length Tolerance | -0.02 to -0.01 mm |
| Through-hole Runout | 0.03 mm |
| End-face Runout | 0.02 mm |
| Diameter Variation Between Ends | 0.002 mm |
| Roundness | 0.0015 mm |
| Ovality | 0.0015 mm |
| Surface Finish | |
| Outside Diameter Surface Roughness, Ra (µm) | 0.14 µm |
| End-face Surface Roughness, Ra (µm) | 0.22 µm |
| Chamfer Geometry | |
| Axial Chamfer | 2.5 mm |
| Axial Chamfer Tolerance | -0.2 to +0.2 mm |
| Radial Chamfer | 2.5 mm |
| Radial Chamfer Tolerance | -0.2 to +0.2 mm |
75*135.5 75 mm 135.5 mm Frequently Asked Questions about 75*135.5 Cylindrical Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Quality starts with raw material selection: CHG Bearing crafts 75*135.5 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
In its sealed configuration (Open Type), CHG Bearing pre-charges 75*135.5 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Every production batch of CHG Bearing 75*135.5 Cylindrical Rollers comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
Each 75*135.5 produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit ( mm bore side) ensures perfect planar contact without edge binding.
