Manufactured by CHG Bearing, the 98*200 is a precision Cylindrical Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
98*200 - Cylindrical Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 98*200 |
| Brand | CHG® |
| Product Type | Cylindrical Roller |
| Dimensions | |
| Roller Diameter, Dw | 98 mm |
| Roller Length, Lw | 200 mm |
| Center Recess Diameter | 45 mm |
| Through-hole Diameter | 22 mm |
| Center Recess Depth | 2 mm |
| Dimensional & Geometrical Accuracy | |
| Roller Diameter Tolerance | -0.03-0.005 mm |
| Roller Length Tolerance | -0.06 to 0 mm |
| Through-hole Runout | 0.03 mm |
| End-face Runout | 0.015 mm |
| Diameter Variation Between Ends | 0.002 mm |
| Roundness | 0.0025 mm |
| Ovality | 0.0025 mm |
| Surface Finish | |
| Outside Diameter Surface Roughness, Ra (µm) | 0.16 µm |
| End-face Surface Roughness, Ra (µm) | 0.25 µm |
| Chamfer Geometry | |
| Axial Chamfer | 2.5 mm |
| Axial Chamfer Tolerance | -0.2 to +0.2 mm |
| Radial Chamfer | 2.5 mm |
| Radial Chamfer Tolerance | -0.2 to +0.2 mm |
98*200 98 mm 200 mm Frequently Asked Questions about 98*200 Cylindrical Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Built for demanding industrial environments, the 98*200 Cylindrical Rollers by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
The CHG Bearing 98*200 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
In its sealed configuration (Open Type), CHG Bearing pre-charges 98*200 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Model 98*200 is manufactured by CHG Bearing in standard Normal clearance (CN) for ambient temperature transmission, and C3 or C4 clearance for heavy duty applications. C3 clearance compensates for radial shrinkage caused by tight shaft press-fits (bore mm) and steep thermal gradients between inner and outer rings.
