Manufactured by CHG Bearing, the 29.6*49.15 is a precision Tapered Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
29.6*49.15 - Tapered Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 29.6*49.15 |
| Brand | CHG® |
| Product Type | Tapered Roller |
| Taper Angle | 1°9' |
| Dimensions | |
| Roller Length, Lw | 49.15 mm |
| Center Recess Diameter | 14 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1 mm |
| Large-end Diameter, Dw | 26.9 mm |
| Spherical End Radius, SR | 700 mm |
| Through-hole Chamfer | - mm |
| Large-end Diameter Tolerance | -0.01 to +0.016 mm |
| Through-hole Coaxiality | - mm |
| Rolling Surface Roughness, Ra (µm) | 0.2 |
| Axial Chamfer — Large End | 1 mm |
| Axial Chamfer Tolerance — Large End | -0.4 to +0.4 mm |
| Radial Chamfer — Large End | 0.8 mm |
| Radial Chamfer Tolerance — Large End | -0.3 to +0.3 mm |
| Axial Chamfer — Small End | 0.8 mm |
| Axial Chamfer Tolerance — Small End | -0.3 to +0.3 mm |
| Radial Chamfer — Small End | 1 mm |
| Radial Chamfer Tolerance — Small End | -0.4 to +0.4 mm |
| Performance | |
| Spherical End Surface Roughness, Ra (µm) | 0.4 µm |
| Dimensional & Geometrical Accuracy | |
| Roller Length Tolerance | -0.4 to 0 mm |
| End-face Runout | - mm |
| Diameter Variation Between Ends | ±0.004 mm |
| Roundness | 0.003 mm |
| Ovality | 0.003 mm |
29.6*49.15 26.9 mm 49.15 mm 700 mm Frequently Asked Questions about 29.6*49.15 Tapered Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To extend the trouble-free lifespan of CHG Bearing 29.6*49.15, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
To match diverse operational dynamics, CHG Bearing supplies 29.6*49.15 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
Quality starts with raw material selection: CHG Bearing crafts 29.6*49.15 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
In its sealed configuration (Open Type), CHG Bearing pre-charges 29.6*49.15 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
