Manufactured by CHG Bearing, the 39.9*52.2 is a precision Tapered Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
39.9*52.2 - Tapered Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 39.9*52.2 |
| Brand | CHG® |
| Product Type | Tapered Roller |
| Taper Angle | 1°9' |
| Dimensions | |
| Roller Length, Lw | 52.2 mm |
| Center Recess Diameter | 18 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1.5 mm |
| Large-end Diameter, Dw | 39.9 mm |
| Spherical End Radius, SR | 944 mm |
| Through-hole Chamfer | - mm |
| Large-end Diameter Tolerance | -0.012 to +0.02 mm |
| Through-hole Coaxiality | - mm |
| Rolling Surface Roughness, Ra (µm) | 0.25 |
| Axial Chamfer — Large End | 1.2 mm |
| Axial Chamfer Tolerance — Large End | -0.4 to +0.4 mm |
| Radial Chamfer — Large End | 1 mm |
| Radial Chamfer Tolerance — Large End | -0.4 to +0.4 mm |
| Axial Chamfer — Small End | 1 mm |
| Axial Chamfer Tolerance — Small End | -0.4 to +0.4 mm |
| Radial Chamfer — Small End | 1.2 mm |
| Radial Chamfer Tolerance — Small End | -0.4 to +0.4 mm |
| Performance | |
| Spherical End Surface Roughness, Ra (µm) | 0.32 µm |
| Dimensional & Geometrical Accuracy | |
| Roller Length Tolerance | -0.4 to 0 mm |
| End-face Runout | - mm |
| Diameter Variation Between Ends | ±0.004 mm |
| Roundness | 0.003 mm |
| Ovality | 0.003 mm |
39.9*52.2 39.9 mm 52.2 mm 944 mm Frequently Asked Questions about 39.9*52.2 Tapered Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing 39.9*52.2 Tapered Rollers comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
Quality starts with raw material selection: CHG Bearing crafts 39.9*52.2 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
Built for demanding industrial environments, the 39.9*52.2 Tapered Rollers by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
The CHG Bearing 39.9*52.2 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
