Manufactured by CHG Bearing, the 40.8*75.62 is a precision Tapered Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
40.8*75.62 - Tapered Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 40.8*75.62 |
| Brand | CHG® |
| Product Type | Tapered Roller |
| Taper Angle | 58' |
| Dimensions | |
| Roller Length, Lw | 75.62 mm |
| Center Recess Diameter | 22 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1.5 mm |
| Large-end Diameter, Dw | 40.8 mm |
| Spherical End Radius, SR | 1148 mm |
| Through-hole Chamfer | - mm |
| Large-end Diameter Tolerance | -0.012 to +0.02 mm |
| Through-hole Coaxiality | - mm |
| Rolling Surface Roughness, Ra (µm) | 0.16 |
| Axial Chamfer — Large End | 2 mm |
| Axial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Radial Chamfer — Large End | 1.5 mm |
| Radial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Axial Chamfer — Small End | 1.5 mm |
| Axial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Radial Chamfer — Small End | 2 mm |
| Radial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Performance | |
| Spherical End Surface Roughness, Ra (µm) | 0.32 µm |
| Dimensional & Geometrical Accuracy | |
| Roller Length Tolerance | -0.4 to 0 mm |
| End-face Runout | - mm |
| Diameter Variation Between Ends | ±0.003 mm |
| Roundness | 0.003 mm |
| Ovality | 0.003 mm |
40.8*75.62 40.8 mm 75.62 mm 1148 mm Frequently Asked Questions about 40.8*75.62 Tapered Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To safeguard CHG Bearing 40.8*75.62 against fretting wear and false brinelling during transport or vibration, assemble mating surfaces ( mm x mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
The Open Type engineered for 40.8*75.62 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
Built for demanding industrial environments, the 40.8*75.62 Tapered Rollers by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
The CHG Bearing 40.8*75.62 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
