Manufactured by CHG Bearing, the 43.1*59.18 is a precision Tapered Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
43.1*59.18 - Tapered Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 43.1*59.18 |
| Brand | CHG® |
| Product Type | Tapered Roller |
| Taper Angle | 58’ |
| Dimensions | |
| Roller Length, Lw | 59.18 mm |
| Center Recess Diameter | 22 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1.5 mm |
| Large-end Diameter, Dw | 41.3 mm |
| Spherical End Radius, SR | 1213 mm |
| Through-hole Chamfer | - mm |
| Large-end Diameter Tolerance | -0.012 to +0.02 mm |
| Through-hole Coaxiality | - mm |
| Rolling Surface Roughness, Ra (µm) | 0.25 |
| Axial Chamfer — Large End | 1.5 mm |
| Axial Chamfer Tolerance — Large End | -0.5 to +0.5 mm |
| Radial Chamfer — Large End | 1.2 mm |
| Radial Chamfer Tolerance — Large End | -0.4 to +0.4 mm |
| Axial Chamfer — Small End | 1.2 mm |
| Axial Chamfer Tolerance — Small End | -0.4 to +0.4 mm |
| Radial Chamfer — Small End | 1.5 mm |
| Radial Chamfer Tolerance — Small End | -0.5 to +0.5 mm |
| Performance | |
| Spherical End Surface Roughness, Ra (µm) | 0.4 µm |
| Dimensional & Geometrical Accuracy | |
| Roller Length Tolerance | -0.5 to 0 mm |
| End-face Runout | - mm |
| Diameter Variation Between Ends | ±0.005 mm |
| Roundness | 0.003 mm |
| Ovality | 0.003 mm |
43.1*59.18 41.3 mm 59.18 mm 1213 mm Frequently Asked Questions about 43.1*59.18 Tapered Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Each 43.1*59.18 produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit ( mm bore side) ensures perfect planar contact without edge binding.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing 43.1*59.18 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
In its sealed configuration (Open Type), CHG Bearing pre-charges 43.1*59.18 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
When fitting 43.1*59.18 over a mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
