Manufactured by CHG Bearing, the 45.37*54.7 is a precision Tapered Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
45.37*54.7 - Tapered Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 45.37*54.7 |
| Brand | CHG® |
| Product Type | Tapered Roller |
| Taper Angle | 1°1' |
| Dimensions | |
| Roller Length, Lw | 54.7 mm |
| Center Recess Diameter | 24 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1.5 mm |
| Large-end Diameter, Dw | 45.37 mm |
| Spherical End Radius, SR | 1214 mm |
| Through-hole Chamfer | - mm |
| Large-end Diameter Tolerance | -0.012 to +0.02 mm |
| Through-hole Coaxiality | - mm |
| Rolling Surface Roughness, Ra (µm) | 0.25 |
| Axial Chamfer — Large End | 1.3 mm |
| Axial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Radial Chamfer — Large End | 1.2 mm |
| Radial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Axial Chamfer — Small End | 1.2 mm |
| Axial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Radial Chamfer — Small End | 1.3 mm |
| Radial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Performance | |
| Spherical End Surface Roughness, Ra (µm) | 0.4 µm |
| Dimensional & Geometrical Accuracy | |
| Roller Length Tolerance | -0.5 to 0 mm |
| End-face Runout | - mm |
| Diameter Variation Between Ends | ±0.005 mm |
| Roundness | 0.003 mm |
| Ovality | 0.003 mm |
45.37*54.7 45.37 mm 54.7 mm 1214 mm Frequently Asked Questions about 45.37*54.7 Tapered Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing 45.37*54.7 Tapered Rollers comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
The CHG Bearing 45.37*54.7 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
To safeguard CHG Bearing 45.37*54.7 against fretting wear and false brinelling during transport or vibration, assemble mating surfaces ( mm x mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
To ensure optimum performance of CHG Bearing 45.37*54.7 Tapered Rollers under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the mm bore. For the mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
