Manufactured by CHG Bearing, the 47.9*88.62 is a precision Tapered Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
47.9*88.62 - Tapered Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 47.9*88.62 |
| Brand | CHG® |
| Product Type | Tapered Roller |
| Taper Angle | 45' |
| Dimensions | |
| Roller Length, Lw | 88.62 mm |
| Center Recess Diameter | 24 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 1.5 mm |
| Large-end Diameter, Dw | 47.9 mm |
| Spherical End Radius, SR | 1738 mm |
| Through-hole Chamfer | - mm |
| Large-end Diameter Tolerance | -0.012 to +0.02 mm |
| Through-hole Coaxiality | - mm |
| Rolling Surface Roughness, Ra (µm) | 0.25 |
| Axial Chamfer — Large End | 1.5 mm |
| Axial Chamfer Tolerance — Large End | -0.5 to +0.5 mm |
| Radial Chamfer — Large End | 1.2 mm |
| Radial Chamfer Tolerance — Large End | -0.4 to +0.4 mm |
| Axial Chamfer — Small End | 1.2 mm |
| Axial Chamfer Tolerance — Small End | -0.4 to +0.4 mm |
| Radial Chamfer — Small End | 1.5 mm |
| Radial Chamfer Tolerance — Small End | -0.5 to +0.5 mm |
| Performance | |
| Spherical End Surface Roughness, Ra (µm) | 0.4 µm |
| Dimensional & Geometrical Accuracy | |
| Roller Length Tolerance | -0.5 to 0 mm |
| End-face Runout | - mm |
| Diameter Variation Between Ends | ±0.003 mm |
| Roundness | 0.003 mm |
| Ovality | 0.003 mm |
47.9*88.62 47.9 mm 88.62 mm 1738 mm Frequently Asked Questions about 47.9*88.62 Tapered Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open Type), CHG Bearing pre-charges 47.9*88.62 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To ensure optimum performance of CHG Bearing 47.9*88.62 Tapered Rollers under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the mm bore. For the mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Quality starts with raw material selection: CHG Bearing crafts 47.9*88.62 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
As standard production, CHG Bearing subjects 47.9*88.62 to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
