Manufactured by CHG Bearing, the 50.5*56.08 is a precision Tapered Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
50.5*56.08 - Tapered Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 50.5*56.08 |
| Brand | CHG® |
| Product Type | Tapered Roller |
| Taper Angle | 1°15' |
| Dimensions | |
| Roller Length, Lw | 56.08 mm |
| Center Recess Diameter | 25 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 2 mm |
| Large-end Diameter, Dw | 50.5 mm |
| Spherical End Radius, SR | 1099 mm |
| Through-hole Chamfer | - mm |
| Large-end Diameter Tolerance | -0.015 to +0.015 mm |
| Through-hole Coaxiality | - mm |
| Rolling Surface Roughness, Ra (µm) | 0.4 |
| Axial Chamfer — Large End | 1.5 mm |
| Axial Chamfer Tolerance — Large End | -0.5 to +0.5 mm |
| Radial Chamfer — Large End | 1.2 mm |
| Radial Chamfer Tolerance — Large End | -0.4 to +0.4 mm |
| Axial Chamfer — Small End | 1.2 mm |
| Axial Chamfer Tolerance — Small End | -0.4 to +0.4 mm |
| Radial Chamfer — Small End | 1.5 mm |
| Radial Chamfer Tolerance — Small End | -0.5 to +0.5 mm |
| Performance | |
| Spherical End Surface Roughness, Ra (µm) | 0.4 µm |
| Dimensional & Geometrical Accuracy | |
| Roller Length Tolerance | -0.5 to 0 mm |
| End-face Runout | - mm |
| Diameter Variation Between Ends | ±0.004 mm |
| Roundness | 0.004 mm |
| Ovality | 0.004 mm |
50.5*56.08 50.5 mm 56.08 mm 1099 mm Frequently Asked Questions about 50.5*56.08 Tapered Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To extend the trouble-free lifespan of CHG Bearing 50.5*56.08, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
In its sealed configuration (Open Type), CHG Bearing pre-charges 50.5*56.08 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing 50.5*56.08 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
Model 50.5*56.08 is manufactured by CHG Bearing in standard Normal clearance (CN) for ambient temperature transmission, and C3 or C4 clearance for heavy duty applications. C3 clearance compensates for radial shrinkage caused by tight shaft press-fits (bore mm) and steep thermal gradients between inner and outer rings.
