Manufactured by CHG Bearing, the 57*131.875 is a precision Tapered Rollers. Key dimensional parameters include a mm bore diameter, a mm outer diameter, and a mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
57*131.875 - Tapered Rollers
Technical Specifications
| Overview | |
|---|---|
| Part Number | 57*131.875 |
| Brand | CHG® |
| Product Type | Tapered Roller |
| Taper Angle | 8°50' |
| Dimensions | |
| Roller Length, Lw | 131.875 mm |
| Center Recess Diameter | 22 mm |
| Through-hole Diameter | - mm |
| Center Recess Depth | 2 mm |
| Large-end Diameter, Dw | 57 mm |
| Spherical End Radius, SR | 184 mm |
| Through-hole Chamfer | - mm |
| Large-end Diameter Tolerance | -0.05 to 0 mm |
| Through-hole Coaxiality | - mm |
| Rolling Surface Roughness, Ra (µm) | 0.25 |
| Axial Chamfer — Large End | 2 mm |
| Axial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Radial Chamfer — Large End | 1.5 mm |
| Radial Chamfer Tolerance — Large End | -0.2 to +0.2 mm |
| Axial Chamfer — Small End | 1.5 mm |
| Axial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Radial Chamfer — Small End | 2 mm |
| Radial Chamfer Tolerance — Small End | -0.2 to +0.2 mm |
| Performance | |
| Spherical End Surface Roughness, Ra (µm) | 0.32 µm |
| Dimensional & Geometrical Accuracy | |
| Roller Length Tolerance | -0.5 to 0 mm |
| End-face Runout | - mm |
| Diameter Variation Between Ends | ±0.005 mm |
| Roundness | 0.004 mm |
| Ovality | 0.004 mm |
57*131.875 57 mm 131.875 mm 184 mm Frequently Asked Questions about 57*131.875 Tapered Rollers
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The CHG Bearing 57*131.875 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
To ensure optimum performance of CHG Bearing 57*131.875 Tapered Rollers under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the mm bore. For the mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Quality starts with raw material selection: CHG Bearing crafts 57*131.875 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
Beyond standard alloy steel, CHG Bearing can customize the 57*131.875 Tapered Rollers using AISI 440C stainless steel, black oxide coating, zinc-nickel plating, or hybrid ceramic (Si3N4) balls for applications involving chemical exposure, marine salt fog, or galvanic current hazards.
