Manufactured by CHG Bearing, the 4CR320/P5 is a precision Four-Row Cylindrical Roller Bearings. Key dimensional parameters include a 320 mm bore diameter, a 450 mm outer diameter, and a 240 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
4CR320/P5 - Four-Row Cylindrical Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 4CR320/P5 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four Row Cylindrical Roller Bearing |
| Number of Rows | Four Row |
| Tolerance Class | P5 |
| Dimensions | |
| Bore Diameter (d) | 320 mm |
| Width (B) | 240 mm |
| Outer Diameter (D) | 450 mm |
| Bore Diameter Tolerance | -0.023 – 0 mm |
| Outside Diameter Tolerance | -0.023 – 0 mm |
| Width Tolerance | -0.40 – 0 mm |
| Enveloping Circle Diameter Fw | 358 mm |
| Inner Ring Chamfer | 3 min mm |
| Outer Ring Chamfer | 3 min mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 2760 kN |
| Basic Static Load Rating C0 (kN) | 6150 kN |
| Material | |
| Mass (kg) | 119 kg |
| Ring Material | Bearing Steel / Case-Hardened Steel |
| Rolling Element Material | Bearing Steel / Case-Hardened Steel |
| Cage Material | Brass |
| Lubrication Groove Width | 12 mm |
| Lubrication Holes (qty × Ø mm) | 6 × Ø6 |
4CR320/P5 450 mm 320 mm 358 mm 240 mm Frequently Asked Questions about 4CR320/P5 Four-Row Cylindrical Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open Type), CHG Bearing pre-charges 4CR320/P5 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
The Open Type engineered for 4CR320/P5 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
The CHG Bearing 4CR320/P5 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
When fitting 4CR320/P5 over a 320 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
