Manufactured by CHG Bearing, the N10/500 is a precision Single Row Cylindrical Roller Bearings. Key dimensional parameters include a 500 mm bore diameter, a 720 mm outer diameter, and a 100 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
N10/500 - Single Row Cylindrical Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | N10/500 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Single Row Cylindrical Roller Bearing |
| Number of Rows | Single Row |
| Tolerance Class | P0 |
| Dimensions | |
| Bore Diameter (d) | 500 mm |
| Width (B) | 100 mm |
| Outer Diameter (D) | 720 mm |
| Bore Diameter Tolerance | -0.045 – 0 mm |
| Outside Diameter Tolerance | -0.075 – 0 mm |
| Width Tolerance | -0.45 – 0 mm |
| Enveloping Circle Diameter Fw | 666 mm |
| Inner Ring Chamfer | 6 min mm |
| Outer Ring Chamfer | 6 min mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 2270 kN |
| Basic Static Load Rating C0 (kN) | 4440 kN |
| Material | |
| Mass (kg) | 141 kg |
| Ring Material | Bearing Steel |
| Rolling Element Material | Bearing Steel |
| Cage Material | Brass |
N10/500 720 mm 500 mm 666 mm 100 mm Frequently Asked Questions about N10/500 Single Row Cylindrical Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting N10/500 over a 500 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To ensure optimum performance of CHG Bearing N10/500 Single Row Cylindrical Roller Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 500 mm bore. For the 720 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Built for demanding industrial environments, the N10/500 Single Row Cylindrical Roller Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
Every production batch of CHG Bearing N10/500 Single Row Cylindrical Roller Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
