Manufactured by CHG Bearing, the N18/1180/P5 is a precision Single Row Cylindrical Roller Bearings. Key dimensional parameters include a 1180 mm bore diameter, a 1420 mm outer diameter, and a 106 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
N18/1180/P5 - Single Row Cylindrical Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | N18/1180/P5 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Single Row Cylindrical Roller Bearing |
| Number of Rows | Single Row |
| Tolerance Class | P5 |
| Dimensions | |
| Bore Diameter (d) | 1180 mm |
| Width (B) | 106 mm |
| Outer Diameter (D) | 1420 mm |
| Bore Diameter Tolerance | -0.095 – 0 mm |
| Outside Diameter Tolerance | -0.10 – 0 mm |
| Width Tolerance | -1.25 – 0 mm |
| Enveloping Circle Diameter Fw | 1365 mm |
| Inner Ring Chamfer | 6 min mm |
| Outer Ring Chamfer | 6 min mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 1940 kN |
| Basic Static Load Rating C0 (kN) | 4300 kN |
| Material | |
| Mass (kg) | 295 kg |
| Ring Material | Bearing Steel |
| Rolling Element Material | Bearing Steel |
| Cage Material | Brass |
| Lubrication Groove Width | 16 mm |
| Lubrication Holes (qty × Ø mm) | 3 × Ø6 |
N18/1180/P5 1420 mm 1180 mm 1365 mm 106 mm Frequently Asked Questions about N18/1180/P5 Single Row Cylindrical Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To extend the trouble-free lifespan of CHG Bearing N18/1180/P5, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
To match diverse operational dynamics, CHG Bearing supplies N18/1180/P5 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
The CHG Bearing N18/1180/P5 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
In its sealed configuration (Open Type), CHG Bearing pre-charges N18/1180/P5 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
