Manufactured by CHG Bearing, the NU1044/P5 is a precision Single Row Cylindrical Roller Bearings. Key dimensional parameters include a 220 mm bore diameter, a 340 mm outer diameter, and a 56 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
NU1044/P5 - Single Row Cylindrical Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | NU1044/P5 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Single Row Cylindrical Roller Bearing |
| Number of Rows | Single Row |
| Tolerance Class | P5 |
| Dimensions | |
| Bore Diameter (d) | 220 mm |
| Width (B) | 56 mm |
| Outer Diameter (D) | 340 mm |
| Bore Diameter Tolerance | -0.015 – 0 mm |
| Outside Diameter Tolerance | -0.020 – 0 mm |
| Width Tolerance | -0.30 – 0 mm |
| Enveloping Circle Diameter Fw | 250 mm |
| Inner Ring Chamfer | 3 min mm |
| Outer Ring Chamfer | 3 min mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 507 kN |
| Basic Static Load Rating C0 (kN) | 748 kN |
| Material | |
| Mass (kg) | 18.5 kg |
| Ring Material | Bearing Steel |
| Rolling Element Material | Bearing Steel |
| Cage Material | Brass |
NU1044/P5 340 mm 220 mm 56 mm 250 mm Frequently Asked Questions about NU1044/P5 Single Row Cylindrical Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open Type), CHG Bearing pre-charges NU1044/P5 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
When fitting NU1044/P5 over a 220 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
As standard production, CHG Bearing subjects NU1044/P5 to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
The Open Type engineered for NU1044/P5 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
