Manufactured by CHG Bearing, the DHK.07.0062P5 is a precision Single Row Tapered Roller Bearings. Key dimensional parameters include a 385.762 mm bore diameter, a 514.35 mm outer diameter, and a N/A mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
DHK.07.0062P5 - Single Row Tapered Roller Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | DHK.07.0062P5 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Single Row Tapered Roller Bearing |
| Number of Rows | Single Row |
| Tolerance Class | P5 |
| Dimensions | |
| Bore Diameter (d) | 385.762 mm |
| Width (B) | N/A mm |
| Outer Diameter (D) | 514.35 mm |
| Outer Ring Width C | 63.5 mm |
| Bore Diameter Tolerance | 0 – +0.025 mm |
| Outside Diameter Tolerance | 0 – +0.025 mm |
| Inner Ring Chamfer | 6.4 min mm |
| Outer Ring Chamfer | 6.4 min mm |
| Shaft Abutment Diameter | N/A mm |
| Housing Abutment Diameter | N/A mm |
| Overall Bearing Width Tolerance | N/A mm |
| Inner Ring Width B | 82.55 mm |
| Inner Ring Width Tolerance | N/A mm |
| Outer Ring Width Tolerance | N/A mm |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 1100 kN |
| Basic Static Load Rating C0 (kN) | 2450 kN |
| Material | |
| Mass (kg) | 51 kg |
| Ring Material | Case-Hardened Steel / Bearing Steel |
| Rolling Element Material | Case-Hardened Steel / Bearing Steel |
| Cage Material | 08Al Steel |
DHK.07.0062P5 514.35 mm 385.762 mm N/A mm Frequently Asked Questions about DHK.07.0062P5 Single Row Tapered Roller Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The CHG Bearing DHK.07.0062P5 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Built for demanding industrial environments, the DHK.07.0062P5 Single Row Tapered Roller Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
Every production batch of CHG Bearing DHK.07.0062P5 Single Row Tapered Roller Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
When fitting DHK.07.0062P5 over a 385.762 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
