Manufactured by CHG Bearing, the 1797/2500G2K3 is a precision Crossed Roller Slewing Bearings. Key dimensional parameters include a 2500 mm bore diameter, a 2920 mm outer diameter, and a 260 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
1797/2500G2K3 - Crossed Roller Slewing Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 1797/2500G2K3 |
| Brand | CHG® |
| Gear Type | Gearless |
| Characteristics | |
| Bearing Type | Single-row Crossed Roller Slewing Bearing |
| Row Configuration | Single-row |
| Dimensions | |
| Bore Diameter (d) | 2500 mm |
| Width (B) | 260 mm |
| Outer Diameter (D) | 2920 mm |
| Inner/Outer Ring Height H1 | 240 mm |
| End-face Height Difference h | 60 mm |
| Number of Lubrication Holes n1 | 36 |
| Mounting Dimensions | |
| Outer Ring Mounting Hole P.C.D. D1 | 3060 mm |
| Inner Ring Mounting Hole P.C.D. D2 | 2622 mm |
| Lubrication Port Thread / Size Φ1 | ZG1/4 |
| Inner Ring Mounting Hole Count n2 | 36 |
| Inner Ring Mounting Hole Specification Φ2 (Ø / Thread) | 40 |
| Outer Ring Mounting Hole Count n3 | 36 |
| Outer Ring Mounting Hole Specification Φ3 (Ø / Thread) | 40 |
| Gear Data | |
| Gear Module m | 18 mm |
| Gear Tip Diameter De | 3258 mm |
| Number of Gear Teeth z | 179 |
| Gear Face Width b | 190 mm |
| Addendum Modification Coefficient x | 0 |
| Reference Data | |
| Reference Mass (kg) | 5407 kg |
1797/2500G2K3 2920 mm 2500 mm 260 mm 3060 mm 2622 mm Frequently Asked Questions about 1797/2500G2K3 Crossed Roller Slewing Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting 1797/2500G2K3 over a 2500 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To ensure optimum performance of CHG Bearing 1797/2500G2K3 Crossed Roller Slewing Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 2500 mm bore. For the 2920 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
In its sealed configuration (Open Type), CHG Bearing pre-charges 1797/2500G2K3 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing 1797/2500G2K3 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
