Manufactured by CHG Bearing, the 010.40.1120.12 is a precision Four-Point Contact Ball Slewing Bearings. Key dimensional parameters include a 998 mm bore diameter, a 1242 mm outer diameter, and a 100 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
010.40.1120.12 - Four-Point Contact Ball Slewing Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 010.40.1120.12 |
| Brand | CHG® |
| Gear Type | Gearless |
| Characteristics | |
| Bearing Type | Single-row Four-point Contact Ball Slewing Bearing |
| Row Configuration | Single-row |
| Dimensions | |
| Bore Diameter (d) | 998 mm |
| Width (B) | 100 mm |
| Outer Diameter (D) | 1242 mm |
| Number of Lubrication Holes n1 | 6 |
| Mounting Dimensions | |
| Outer Ring Mounting Hole P.C.D. D1 | 1198 mm |
| Inner Ring Mounting Hole P.C.D. D2 | 1042 mm |
| Lubrication Port Thread / Size Φ1 | 10 |
| Inner Ring Mounting Hole Count n2 | 36 |
| Inner Ring Mounting Hole Specification Φ2 (Ø / Thread) | 22 |
| Outer Ring Mounting Hole Count n3 | 36 |
| Outer Ring Mounting Hole Specification Φ3 (Ø / Thread) | 20 |
| Reference Data | |
| Reference Mass (kg) | 274 kg |
010.40.1120.12 1242 mm 998 mm 100 mm 1042 mm 1198 mm Frequently Asked Questions about 010.40.1120.12 Four-Point Contact Ball Slewing Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing 010.40.1120.12 Four-Point Contact Ball Slewing Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
The CHG Bearing 010.40.1120.12 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
When fitting 010.40.1120.12 over a 998 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Built for demanding industrial environments, the 010.40.1120.12 Four-Point Contact Ball Slewing Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
