Manufactured by CHG Bearing, the 012.45.1800.03 is a precision Four-Point Contact Ball Slewing Bearings. Key dimensional parameters include a 1660 mm bore diameter, a 1940 mm outer diameter, and a 110 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
012.45.1800.03 - Four-Point Contact Ball Slewing Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 012.45.1800.03 |
| Brand | CHG® |
| Gear Type | External Gear |
| Characteristics | |
| Bearing Type | Single-row Four-point Contact Ball Slewing Bearing |
| Row Configuration | Single-row |
| Dimensions | |
| Bore Diameter (d) | 1660 mm |
| Width (B) | 110 mm |
| Outer Diameter (D) | 1940 mm |
| Number of Lubrication Holes n1 | 5 |
| Mounting Dimensions | |
| Outer Ring Mounting Hole P.C.D. D1 | 1887 mm |
| Inner Ring Mounting Hole P.C.D. D2 | 1713 mm |
| Lubrication Port Thread / Size Φ1 | 10 |
| Inner Ring Mounting Hole Count n2 | 45 |
| Inner Ring Mounting Hole Specification Φ2 (Ø / Thread) | 26 |
| Outer Ring Mounting Hole Count n3 | 45 |
| Outer Ring Mounting Hole Specification Φ3 (Ø / Thread) | 26 |
| Gear Data | |
| Gear Module m | 16 mm |
| Gear Tip Diameter De | 2012.8 mm |
| Number of Gear Teeth z | 123 |
| Gear Face Width b | 90 mm |
| Addendum Modification Coefficient x | 0.5 |
| Reference Data | |
| Reference Mass (kg) | 644 kg |
012.45.1800.03 1940 mm 1887 mm 1660 mm 110 mm 1713 mm Frequently Asked Questions about 012.45.1800.03 Four-Point Contact Ball Slewing Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open Type), CHG Bearing pre-charges 012.45.1800.03 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Quality starts with raw material selection: CHG Bearing crafts 012.45.1800.03 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing 012.45.1800.03 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
To ensure optimum performance of CHG Bearing 012.45.1800.03 Four-Point Contact Ball Slewing Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 1660 mm bore. For the 1940 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
