Manufactured by CHG Bearing, the 7022 ACE/HCP4A is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 110 mm bore diameter, a 170 mm outer diameter, and a 28 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
7022 ACE/HCP4A - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 7022 ACE/HCP4A |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Number of Rows | 1 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed E Design |
| Universally Matchable | No |
| Axial Clearance / Preload | Not Applicable |
| Tolerance Class | P4A |
| Bearing Material | Hybrid (Steel Rings / Ceramic Balls) |
| Sealing | Open |
| Dimensions | |
| Bore Diameter (d) | 110 mm |
| Width (B) | 28 mm |
| Outer Diameter (D) | 170 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 44.9 kN |
| Basic Static Load Rating C₀ (kN) | 42.5 kN |
| Limiting Speed – Grease (r/min) | 11500 r/min |
| Limiting Speed – Oil-air (r/min) | 17500 r/min |
| Material | |
| Weight (kg) | 1.59 kg |
7022 ACE/HCP4A 170 mm 110 mm 28 mm Frequently Asked Questions about 7022 ACE/HCP4A Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
As standard production, CHG Bearing subjects 7022 ACE/HCP4A to precision bainite or martensite quenching, offering dimensional stability up to 120°C (248°F). For high-heat processing equipment, CHG Bearing also supplies custom S0 (150°C), S1 (200°C), or S2 (250°C) stabilization heat treatments upon request to prevent residual austenite transformation.
The CHG Bearing 7022 ACE/HCP4A is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
To ensure optimum performance of CHG Bearing 7022 ACE/HCP4A Super-precision Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 110 mm bore. For the 170 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
When fitting 7022 ACE/HCP4A over a 110 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
