Manufactured by CHG Bearing, the 71918 ACDGA/P4A is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 90 mm bore diameter, a 125 mm outer diameter, and a 18 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
71918 ACDGA/P4A - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 71918 ACDGA/P4A |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Number of Rows | 1 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | Yes – Back-to-back (DB), Face-to-face (DF), or Tandem (DT) |
| Axial Clearance / Preload | Preload Class A |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Open |
| Dimensions | |
| Bore Diameter (d) | 90 mm |
| Width (B) | 18 mm |
| Outer Diameter (D) | 125 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 44.2 kN |
| Basic Static Load Rating C₀ (kN) | 48 kN |
| Material | |
| Weight (kg) | 0.549 kg |
71918 ACDGA/P4A 125 mm 90 mm 18 mm Frequently Asked Questions about 71918 ACDGA/P4A Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The CHG Bearing 71918 ACDGA/P4A is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
When fitting 71918 ACDGA/P4A over a 90 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
Quality starts with raw material selection: CHG Bearing crafts 71918 ACDGA/P4A inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
To safeguard CHG Bearing 71918 ACDGA/P4A against fretting wear and false brinelling during transport or vibration, assemble mating surfaces (90 mm x 125 mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
