Manufactured by CHG Bearing, the 7211 ACD/P4ADFA is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 55 mm bore diameter, a 100 mm outer diameter, and a 42 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
7211 ACD/P4ADFA - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | 7211 ACD/P4ADFA |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Number of Rows | 2 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | No |
| Matched Arrangement | Face-to-face (DF) |
| Number of Bearings in Set | 2 |
| Axial Clearance / Preload | Extra-light Preload |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Open |
| Dimensions | |
| Bore Diameter (d) | 55 mm |
| Width (B) | 42 mm |
| Outer Diameter (D) | 100 mm |
| Contact Angle α (°) | 25 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 85.2 kN |
| Basic Static Load Rating C₀ (kN) | 81.5 kN |
| Material | |
| Weight (kg) | 1.21 kg |
7211 ACD/P4ADFA 100 mm 55 mm 42 mm Frequently Asked Questions about 7211 ACD/P4ADFA Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
To safeguard CHG Bearing 7211 ACD/P4ADFA against fretting wear and false brinelling during transport or vibration, assemble mating surfaces (55 mm x 100 mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
When fitting 7211 ACD/P4ADFA over a 55 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To extend the trouble-free lifespan of CHG Bearing 7211 ACD/P4ADFA, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
In its sealed configuration (Open Type), CHG Bearing pre-charges 7211 ACD/P4ADFA with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
