Manufactured by CHG Bearing, the S71907 CEGA/HCP4A is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 35 mm bore diameter, a 55 mm outer diameter, and a 10 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S71907 CEGA/HCP4A - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S71907 CEGA/HCP4A |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 1 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed E Design |
| Universally Matchable | Yes – Back-to-back (DB), Face-to-face (DF), or Tandem (DT) |
| Axial Clearance / Preload | Preload Class A |
| Tolerance Class | P4A |
| Bearing Material | Hybrid (Steel Rings / Ceramic Balls) |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 35 mm |
| Width (B) | 10 mm |
| Outer Diameter (D) | 55 mm |
| Contact Angle α (°) | 15 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 7.8 kN |
| Basic Static Load Rating C₀ (kN) | 4.65 kN |
| Material | |
| Weight (kg) | 0.067 kg |
S71907 CEGA/HCP4A 55 mm 35 mm 10 mm Frequently Asked Questions about S71907 CEGA/HCP4A Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing S71907 CEGA/HCP4A Super-precision Angular Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
Beyond standard alloy steel, CHG Bearing can customize the S71907 CEGA/HCP4A Super-precision Angular Contact Ball Bearings using AISI 440C stainless steel, black oxide coating, zinc-nickel plating, or hybrid ceramic (Si3N4) balls for applications involving chemical exposure, marine salt fog, or galvanic current hazards.
To ensure optimum performance of CHG Bearing S71907 CEGA/HCP4A Super-precision Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 35 mm bore. For the 55 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
When fitting S71907 CEGA/HCP4A over a 35 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
