Manufactured by CHG Bearing, the S71909 CDGA/HCP4A is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 45 mm bore diameter, a 68 mm outer diameter, and a 12 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S71909 CDGA/HCP4A - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S71909 CDGA/HCP4A |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 1 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-capacity D Design |
| Universally Matchable | Yes – Back-to-back (DB), Face-to-face (DF), or Tandem (DT) |
| Axial Clearance / Preload | Preload Class A |
| Tolerance Class | P4A |
| Bearing Material | Hybrid (Steel Rings / Ceramic Balls) |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 45 mm |
| Width (B) | 12 mm |
| Outer Diameter (D) | 68 mm |
| Contact Angle α (°) | 15 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 13 kN |
| Basic Static Load Rating C₀ (kN) | 9.5 kN |
| Material | |
| Weight (kg) | 0.118 kg |
S71909 CDGA/HCP4A 68 mm 45 mm 12 mm Frequently Asked Questions about S71909 CDGA/HCP4A Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Non-contact Seal), CHG Bearing pre-charges S71909 CDGA/HCP4A with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To extend the trouble-free lifespan of CHG Bearing S71909 CDGA/HCP4A, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
When fitting S71909 CDGA/HCP4A over a 45 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To safeguard CHG Bearing S71909 CDGA/HCP4A against fretting wear and false brinelling during transport or vibration, assemble mating surfaces (45 mm x 68 mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
