Manufactured by CHG Bearing, the S71913 CE/P4A is a precision Super-precision Angular Contact Ball Bearings. Key dimensional parameters include a 65 mm bore diameter, a 90 mm outer diameter, and a 13 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
S71913 CE/P4A - Super-precision Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | S71913 CE/P4A |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super-precision Angular Contact Ball Bearing |
| Seal Type | Non-contact Seal |
| Number of Rows | 1 |
| Contact Type | Normal Contact (Two-point Contact) |
| Ring Type | Integral Inner and Outer Rings |
| Design | High-speed E Design |
| Universally Matchable | No |
| Axial Clearance / Preload | Not Applicable |
| Tolerance Class | P4A |
| Bearing Material | Bearing Steel |
| Sealing | Sealed on Both Sides |
| Lubricant | Grease |
| Dimensions | |
| Bore Diameter (d) | 65 mm |
| Width (B) | 13 mm |
| Outer Diameter (D) | 90 mm |
| Contact Angle α (°) | 15 ° |
| Performance | |
| Basic Dynamic Load Rating C (kN) | 16.5 kN |
| Basic Static Load Rating C₀ (kN) | 12.2 kN |
| Limiting Speed – Grease (r/min) | 20000 r/min |
| Material | |
| Weight (kg) | 0.209 kg |
S71913 CE/P4A 90 mm 65 mm 13 mm Frequently Asked Questions about S71913 CE/P4A Super-precision Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Engineered according to international ISO boundary plans, CHG Bearing supplies S71913 CE/P4A with a precision bore diameter (d) of 65 mm, an outside diameter (D) of 90 mm, and a nominal ring width (B) of 13 mm. This configuration yields an effective cross-sectional wall thickness of 12.5 mm and an envelope ratio (D/d) of 1.38, delivering compact rigidity for OEM machinery housings.
In its sealed configuration (Non-contact Seal), CHG Bearing pre-charges S71913 CE/P4A with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
To match diverse operational dynamics, CHG Bearing supplies S71913 CE/P4A with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
The CHG Bearing S71913 CE/P4A is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
