Manufactured by CHG Bearing, the HJB025XP4 is a precision Thin Section Four-Point Contact Ball Bearings. Key dimensional parameters include a 63.5 mm bore diameter, a 79.375 mm outer diameter, and a 7.9375 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HJB025XP4 - Thin Section Four-Point Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HJB025XP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four-Point Contact Ball Bearing |
| Series | JB |
| Seal Type | Sealed |
| Load Direction | Radial, Bidirectional Axial and Moment |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 63.5 mm |
| Width (B) | 7.9375 mm |
| Outer Diameter (D) | 79.375 mm |
| Bore Diameter Tolerance | -0.005-0 mm |
| Outside Diameter Tolerance | -0.005-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 67 mm |
| Outer-Ring Land Diameter (L2 / D1) | 72.7 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 5070 N |
| Basic Dynamic Radial Load Rating Cr (N) | 3370 N |
| Basic Static Axial Load Rating C0a (N) | 12620 N |
| Basic Dynamic Axial Load Rating Ca (N) | 5730 N |
| Material | |
| Mass (kg) | 0.086 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | -0.025-0.011 mm |
HJB025XP4 79.375 mm 63.5 mm 7.9375 mm Frequently Asked Questions about HJB025XP4 Thin Section Four-Point Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The CHG Bearing HJB025XP4 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Every production batch of CHG Bearing HJB025XP4 Thin Section Four-Point Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
Each HJB025XP4 produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit (63.5 mm bore side) ensures perfect planar contact without edge binding.
For international ocean and air freight, CHG Bearing packs HJB025XP4 with industrial VCI anti-corrosion barrier wrapping, sealed polybags, individual cartons, and fumigated ocean-worthy wooden crates. This multi-layer barrier guarantees rust-free storage for a minimum shelf life of 24 to 36 months.
