Manufactured by CHG Bearing, the HJB035XP4 is a precision Thin Section Four-Point Contact Ball Bearings. Key dimensional parameters include a 88.9 mm bore diameter, a 104.775 mm outer diameter, and a 7.9375 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HJB035XP4 - Thin Section Four-Point Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HJB035XP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Four-Point Contact Ball Bearing |
| Series | JB |
| Seal Type | Sealed |
| Load Direction | Radial, Bidirectional Axial and Moment |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 88.9 mm |
| Width (B) | 7.9375 mm |
| Outer Diameter (D) | 104.775 mm |
| Bore Diameter Tolerance | -0.006-0 mm |
| Outside Diameter Tolerance | -0.0076-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 92.4 mm |
| Outer-Ring Land Diameter (L2 / D1) | 98.1 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 6850 N |
| Basic Dynamic Radial Load Rating Cr (N) | 4510 N |
| Basic Static Axial Load Rating C0a (N) | 17160 N |
| Basic Dynamic Axial Load Rating Ca (N) | 7070 N |
| Material | |
| Mass (kg) | 0.122 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | -0.03-0.016 mm |
HJB035XP4 104.775 mm 88.9 mm 7.9375 mm Frequently Asked Questions about HJB035XP4 Thin Section Four-Point Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing HJB035XP4 Thin Section Four-Point Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing HJB035XP4 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
To ensure optimum performance of CHG Bearing HJB035XP4 Thin Section Four-Point Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 88.9 mm bore. For the 104.775 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Quality starts with raw material selection: CHG Bearing crafts HJB035XP4 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
