Manufactured by CHG Bearing, the HWAA13160HP4 is a precision Super Duplex Angular Contact Ball Bearings. Key dimensional parameters include a 254 mm bore diameter, a 274.6375 mm outer diameter, and a 15.875 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HWAA13160HP4 - Super Duplex Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HWAA13160HP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super Duplex Angular Contact Ball Bearing |
| Series | AA13 |
| Seal Type | Open / Single-Sided Sealed / Double-Sided Sealed |
| Load Direction | Combined Radial and Axial |
| Row Configuration | Double Row |
| Dimensions | |
| Bore Diameter (d) | 254 mm |
| Width (B) | 15.875 mm |
| Outer Diameter (D) | 274.6375 mm |
| Outside Diameter Tolerance | -0.018-0 mm |
| Width Tolerance | -0.5-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 261.354 mm |
| Outer-Ring Land Diameter (L2 / D1) | 267.28 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 89800 N |
| Basic Dynamic Radial Load Rating Cr (N) | 20900 N |
| Basic Static Axial Load Rating C0a (N) | 46100 N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 0.784Kg kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / Polyimide / PEEK / Phenolic Resin / Phenolic Resin Fabric Laminate |
| Ball Material | Ceramic / Stainless Steel / Bearing Steel |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | N/A mm |
HWAA13160HP4 274.6375 mm 254 mm 15.875 mm 267.28 mm 261.354 mm Frequently Asked Questions about HWAA13160HP4 Super Duplex Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
When fitting HWAA13160HP4 over a 254 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
In its sealed configuration (Open / Single-Sided Sealed / Double-Sided Sealed), CHG Bearing pre-charges HWAA13160HP4 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
The Open / Single-Sided Sealed / Double-Sided Sealed engineered for HWAA13160HP4 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
To match diverse operational dynamics, CHG Bearing supplies HWAA13160HP4 with multiple cage configurations: high-strength pressed steel ribbon cages for standard duty, solid machined brass cages (M/CA) for heavy vibration and shock loads, or lightweight glass-fiber reinforced polyamide cages (TN9/TVP) for high acceleration and ultra-low noise.
