Manufactured by CHG Bearing, the HWAA614HP4 is a precision Super Duplex Angular Contact Ball Bearings. Key dimensional parameters include a 22.225 mm bore diameter, a 31.75 mm outer diameter, and a 9.525 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HWAA614HP4 - Super Duplex Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HWAA614HP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super Duplex Angular Contact Ball Bearing |
| Series | AA6 |
| Seal Type | Open / Single-Sided Sealed / Double-Sided Sealed |
| Load Direction | Combined Radial and Axial |
| Row Configuration | Double Row |
| Dimensions | |
| Bore Diameter (d) | 22.225 mm |
| Width (B) | 9.525 mm |
| Outer Diameter (D) | 31.75 mm |
| Outside Diameter Tolerance | -0.005-0 mm |
| Width Tolerance | -0.38-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 25.50922 mm |
| Outer-Ring Land Diameter (L2 / D1) | 28.46 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 3680 N |
| Basic Dynamic Radial Load Rating Cr (N) | 3030 N |
| Basic Static Axial Load Rating C0a (N) | 2950 N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 0.021Kg kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / Polyimide / PEEK / Phenolic Resin / Phenolic Resin Fabric Laminate |
| Ball Material | Ceramic / Stainless Steel / Bearing Steel |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | N/A mm |
HWAA614HP4 31.75 mm 22.225 mm 9.525 mm 28.46 mm 25.50922 mm Frequently Asked Questions about HWAA614HP4 Super Duplex Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The Open / Single-Sided Sealed / Double-Sided Sealed engineered for HWAA614HP4 by CHG Bearing utilizes precision non-contact metal shields or reinforced NBR/FKM contact lip seals. This barrier prevents particulate ingress, washdown fluids, and abrasive dust from reaching the raceways while eliminating grease leakage under centrifugal forces.
Standard batches of CHG Bearing HWAA614HP4 conform strictly to ISO Class Normal (ABEC-1). For high-precision machine tool spindles, gearboxes, or robotics requiring tighter runouts, CHG Bearing can provide custom batches graded to ISO Class 6 (P6/ABEC-3) or ISO Class 5 (P5/ABEC-5) with 100% micrometer verification.
In its sealed configuration (Open / Single-Sided Sealed / Double-Sided Sealed), CHG Bearing pre-charges HWAA614HP4 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
When fitting HWAA614HP4 over a 22.225 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
