Manufactured by CHG Bearing, the HWAD956HP4 is a precision Super Duplex Angular Contact Ball Bearings. Key dimensional parameters include a 88.9 mm bore diameter, a 103.1875 mm outer diameter, and a 9.525 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HWAD956HP4 - Super Duplex Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HWAD956HP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Super Duplex Angular Contact Ball Bearing |
| Series | AD9 |
| Seal Type | Open / Single-Sided Sealed / Double-Sided Sealed |
| Load Direction | Combined Radial and Axial |
| Row Configuration | Double Row |
| Dimensions | |
| Bore Diameter (d) | 88.9 mm |
| Width (B) | 9.525 mm |
| Outer Diameter (D) | 103.1875 mm |
| Outside Diameter Tolerance | -0.01-0 mm |
| Width Tolerance | -0.5-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 94.05874 mm |
| Outer-Ring Land Diameter (L2 / D1) | 97.02038 mm |
| Counterbore Diameter L3 | N/A mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 11400 N |
| Basic Dynamic Radial Load Rating Cr (N) | 4560 N |
| Basic Static Axial Load Rating C0a (N) | 10000 N |
| Basic Dynamic Axial Load Rating Ca (N) | N/A N |
| Material | |
| Mass (kg) | 0.129Kg kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / Polyimide / PEEK / Phenolic Resin / Phenolic Resin Fabric Laminate |
| Ball Material | Ceramic / Stainless Steel / Bearing Steel |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | N/A mm |
HWAD956HP4 103.1875 mm 88.9 mm 9.525 mm 97.02038 mm 94.05874 mm Frequently Asked Questions about HWAD956HP4 Super Duplex Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Sourcing HWAD956HP4 directly from CHG Bearing eliminates intermediate brokerage markups while granting you factory-direct engineering backup, rigorous ISO-certified quality assurance, competitive volume wholesale pricing, and dependable supply chain stability for Super Duplex Angular Contact Ball Bearings.
When fitting HWAD956HP4 over a 88.9 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To ensure optimum performance of CHG Bearing HWAD956HP4 Super Duplex Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 88.9 mm bore. For the 103.1875 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
In its sealed configuration (Open / Single-Sided Sealed / Double-Sided Sealed), CHG Bearing pre-charges HWAD956HP4 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
