Manufactured by CHG Bearing, the HKAA015AP4 is a precision Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 38.1 mm bore diameter, a 47.625 mm outer diameter, and a 4.7625 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKAA015AP4 - Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKAA015AP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | KAA |
| Seal Type | Open |
| Load Direction | Combined Radial and Unidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 38.1 mm |
| Width (B) | 4.7625 mm |
| Outer Diameter (D) | 47.625 mm |
| Bore Diameter Tolerance | -0.005-0 mm |
| Outside Diameter Tolerance | -0.005-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 41.71 mm |
| Outer-Ring Land Diameter (L2 / D1) | 44.09 mm |
| Counterbore Diameter L3 | 45.0596 mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 2130 N |
| Basic Dynamic Radial Load Rating Cr (N) | 1060 N |
| Basic Static Axial Load Rating C0a (N) | 1060 N |
| Basic Dynamic Axial Load Rating Ca (N) | 2490 N |
| Material | |
| Mass (kg) | 0.017 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | N/A mm |
HKAA015AP4 47.625 mm 38.1 mm 4.7625 mm Frequently Asked Questions about HKAA015AP4 Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Every production batch of CHG Bearing HKAA015AP4 Thin Section Angular Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
Built for demanding industrial environments, the HKAA015AP4 Thin Section Angular Contact Ball Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
The CHG Bearing HKAA015AP4 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Yes, CHG Bearing works closely with industrial OEMs and brand distributors. We offer turnkey custom engineering for HKAA015AP4, including laser-etched customer logos, custom internal radial clearances, specialized grease formulations, and bespoke protective packaging.
