Manufactured by CHG Bearing, the HKC070AP4 is a precision Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 177.8 mm bore diameter, a 196.85 mm outer diameter, and a 9.525 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKC070AP4 - Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKC070AP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | KC |
| Seal Type | Open |
| Load Direction | Combined Radial and Unidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 177.8 mm |
| Width (B) | 9.525 mm |
| Outer Diameter (D) | 196.85 mm |
| Bore Diameter Tolerance | -0.0076-0 mm |
| Outside Diameter Tolerance | -0.01-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 184.8358 mm |
| Outer-Ring Land Diameter (L2 / D1) | 189.8142 mm |
| Counterbore Diameter L3 | 191.77 mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 19200 N |
| Basic Dynamic Radial Load Rating Cr (N) | 7000 N |
| Basic Static Axial Load Rating C0a (N) | 55430 N |
| Basic Dynamic Axial Load Rating Ca (N) | 17490 N |
| Material | |
| Mass (kg) | 0.336 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | N/A mm |
HKC070AP4 196.85 mm 177.8 mm 9.525 mm Frequently Asked Questions about HKC070AP4 Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Each HKC070AP4 produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit (177.8 mm bore side) ensures perfect planar contact without edge binding.
Quality starts with raw material selection: CHG Bearing crafts HKC070AP4 inner and outer rings from high-purity High-Quality Chrome Steel (GCr15/100Cr6). Our raw billets undergo vacuum degassing and secondary ESR (electroslag remelting) processes to drastically eliminate non-metallic sulfide and oxide inclusions, elevating subsurface contact fatigue resistance.
To extend the trouble-free lifespan of CHG Bearing HKC070AP4, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
Every production batch of CHG Bearing HKC070AP4 Thin Section Angular Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
