Manufactured by CHG Bearing, the HKG045AP4 is a precision Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 114.3 mm bore diameter, a 165.1 mm outer diameter, and a 25.4 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKG045AP4 - Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKG045AP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | KG |
| Seal Type | Open |
| Load Direction | Combined Radial and Unidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 114.3 mm |
| Width (B) | 25.4 mm |
| Outer Diameter (D) | 165.1 mm |
| Bore Diameter Tolerance | -0.006-0 mm |
| Outside Diameter Tolerance | -0.01-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 133.1468 mm |
| Outer-Ring Land Diameter (L2 / D1) | 146.2532 mm |
| Counterbore Diameter L3 | 152.1206 mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 46360 N |
| Basic Dynamic Radial Load Rating Cr (N) | 29170 N |
| Basic Static Axial Load Rating C0a (N) | 133800 N |
| Basic Dynamic Axial Load Rating Ca (N) | 64590 N |
| Material | |
| Mass (kg) | 1.79 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | N/A mm |
HKG045AP4 165.1 mm 114.3 mm 25.4 mm Frequently Asked Questions about HKG045AP4 Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
The CHG Bearing HKG045AP4 is rated for limiting speeds up to standard rated RPM under forced oil-mist or circulating oil lubrication regimes. When lubricated with factory-filled synthetic high-speed grease, safe continuous velocity is maintained at approximately 75% to 85% of the maximum nominal limit, preventing thermal runaway.
Yes, CHG Bearing works closely with industrial OEMs and brand distributors. We offer turnkey custom engineering for HKG045AP4, including laser-etched customer logos, custom internal radial clearances, specialized grease formulations, and bespoke protective packaging.
To ensure optimum performance of CHG Bearing HKG045AP4 Thin Section Angular Contact Ball Bearings under general rotational loads, our application engineers advise an inner-ring shaft tolerance of m5 or k5 for the 114.3 mm bore. For the 165.1 mm outer ring, an H7 or J7 housing bore fit is recommended to eliminate creep while accommodating normal thermal gradient expansion.
Every production batch of CHG Bearing HKG045AP4 Thin Section Angular Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
