Manufactured by CHG Bearing, the HKG050AP4 is a precision Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 127 mm bore diameter, a 177.8 mm outer diameter, and a 25.4 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKG050AP4 - Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKG050AP4 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | KG |
| Seal Type | Open |
| Load Direction | Combined Radial and Unidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 127 mm |
| Width (B) | 25.4 mm |
| Outer Diameter (D) | 177.8 mm |
| Bore Diameter Tolerance | -0.0076-0 mm |
| Outside Diameter Tolerance | -0.01-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 145.8468 mm |
| Outer-Ring Land Diameter (L2 / D1) | 158.9532 mm |
| Counterbore Diameter L3 | 164.8206 mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 50540 N |
| Basic Dynamic Radial Load Rating Cr (N) | 30660 N |
| Basic Static Axial Load Rating C0a (N) | 145930 N |
| Basic Dynamic Axial Load Rating Ca (N) | 68450 N |
| Material | |
| Mass (kg) | 2 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P4 |
| Radial Internal Clearance | N/A mm |
HKG050AP4 177.8 mm 127 mm 25.4 mm Frequently Asked Questions about HKG050AP4 Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
In its sealed configuration (Open), CHG Bearing pre-charges HKG050AP4 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Standard batches of CHG Bearing HKG050AP4 conform strictly to ISO Class Normal (ABEC-1). For high-precision machine tool spindles, gearboxes, or robotics requiring tighter runouts, CHG Bearing can provide custom batches graded to ISO Class 6 (P6/ABEC-3) or ISO Class 5 (P5/ABEC-5) with 100% micrometer verification.
Following standard ISO 281 fatigue calculation guidelines, the nominal rating life (L10) of CHG Bearing HKG050AP4 correlates its dynamic capacity (standard dynamic) with equivalent dynamic loads. In controlled industrial settings with proper contamination-free filtration, field data confirms continuous operational longevity exceeding 20,000 to 50,000 service hours.
Each HKG050AP4 produced in CHG Bearing manufacturing facilities features accurately profiled corner chamfers complying with DIN 5412 / ISO standard corner radii. When designing mating shafts and housing shoulders, machining an undercut or fillet radius strictly within the inner ring clearance limit (127 mm bore side) ensures perfect planar contact without edge binding.
