Manufactured by CHG Bearing, the HKG080AP0 is a precision Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 203.2 mm bore diameter, a 254 mm outer diameter, and a 25.4 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKG080AP0 - Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKG080AP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | KG |
| Seal Type | Open |
| Load Direction | Combined Radial and Unidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 203.2 mm |
| Width (B) | 25.4 mm |
| Outer Diameter (D) | 254 mm |
| Bore Diameter Tolerance | -0.03-0 mm |
| Outside Diameter Tolerance | -0.03-0 mm |
| Width Tolerance | -0.127-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 222.0468 mm |
| Outer-Ring Land Diameter (L2 / D1) | 235.1532 mm |
| Counterbore Diameter L3 | 240.919 mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 75830 N |
| Basic Dynamic Radial Load Rating Cr (N) | 38080 N |
| Basic Static Axial Load Rating C0a (N) | 218920 N |
| Basic Dynamic Axial Load Rating Ca (N) | 89700 N |
| Material | |
| Mass (kg) | 2.97 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | N/A mm |
HKG080AP0 254 mm 203.2 mm 25.4 mm Frequently Asked Questions about HKG080AP0 Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
Built for demanding industrial environments, the HKG080AP0 Thin Section Angular Contact Ball Bearings by CHG Bearing boasts a dynamic load rating (Cr) of standard dynamic and a static load threshold (C0r) of standard static. The optimized internal raceway geometry balances stress distribution, mitigating edge loading even when operating under peak mechanical stresses.
As a primary manufacturer, CHG Bearing supports both trial batch evaluations and container-load supply for HKG080AP0. Standard catalog sizes are stocked for rapid 3–7 day dispatch, while high-volume OEM production runs typically dispatch within 30–45 days.
In its sealed configuration (Open), CHG Bearing pre-charges HKG080AP0 with premium wide-temperature lithium-complex or polyurea grease, calibrated to a 30%–35% cavity volume ratio. For open-type variants, synthetic PAO or refined mineral lubricating oils with appropriate EP (Extreme Pressure) additives should be circulated.
Every production batch of CHG Bearing HKG080AP0 Thin Section Angular Contact Ball Bearings comes with complete traceability. Upon shipment, CHG Bearing can provide EN 10204 3.1 Material Test Reports (MTR), Certificates of Conformity (CoC), spectral chemical composition analysis, and dimensional inspection sheets.
