Manufactured by CHG Bearing, the HKG180AP0 is a precision Thin Section Angular Contact Ball Bearings. Key dimensional parameters include a 457.2 mm bore diameter, a 508 mm outer diameter, and a 25.4 mm overall width. This component is designed to meet standard load requirements and ensure consistent operational performance. For comprehensive technical evaluation, please explore the detailed specifications, dimensional data, product images, and CAD drawings provided below. A complete PDF data sheet is also readily available for direct download to support your engineering and procurement needs.
HKG180AP0 - Thin Section Angular Contact Ball Bearings
Technical Specifications
| Overview | |
|---|---|
| Part Number | HKG180AP0 |
| Brand | CHG® |
| Characteristics | |
| Bearing Type | Angular Contact Ball Bearing |
| Series | KG |
| Seal Type | Open |
| Load Direction | Combined Radial and Unidirectional Axial |
| Row Configuration | Single Row |
| Dimensions | |
| Bore Diameter (d) | 457.2 mm |
| Width (B) | 25.4 mm |
| Outer Diameter (D) | 508 mm |
| Bore Diameter Tolerance | -0.04-0 mm |
| Outside Diameter Tolerance | -0.04-0 mm |
| Width Tolerance | -0.254-0 mm |
| Inner-Ring Land Diameter (L1 / d1) | 476.0468 mm |
| Outer-Ring Land Diameter (L2 / D1) | 489.1532 mm |
| Counterbore Diameter L3 | 494.5888 mm |
| Performance | |
| Basic Static Radial Load Rating C0r (N) | 160110 N |
| Basic Dynamic Radial Load Rating Cr (N) | 57660 N |
| Basic Static Axial Load Rating C0a (N) | 462280 N |
| Basic Dynamic Axial Load Rating Ca (N) | 147570 N |
| Material | |
| Mass (kg) | 6.26 kg |
| Ring Material | Stainless Steel / Bearing Steel |
| Cage Material | Brass / PEEK / Polyimide / Phenolic Resin Fabric Laminate |
| Ball Material | Stainless Steel / Bearing Steel / Ceramic |
| Operating Temperature Range (°C) | -50 to +100 °C °C |
| Precision Class | P0 |
| Radial Internal Clearance | N/A mm |
HKG180AP0 508 mm 457.2 mm 25.4 mm Frequently Asked Questions about HKG180AP0 Thin Section Angular Contact Ball Bearings
Find key technical answers regarding dimensions, specifications, and replacement options for this model.
As a primary manufacturer, CHG Bearing supports both trial batch evaluations and container-load supply for HKG180AP0. Standard catalog sizes are stocked for rapid 3–7 day dispatch, while high-volume OEM production runs typically dispatch within 30–45 days.
When fitting HKG180AP0 over a 457.2 mm shaft, CHG Bearing strictly recommends uniform induction heating (controlled between 90°C and 110°C) or precision hydraulic press sleeves. Under no circumstances should direct impact blows be struck against the rings or cage, as shock loads cause brinelling indents and premature spalling.
To extend the trouble-free lifespan of CHG Bearing HKG180AP0, preventive maintenance routines should monitor operating housing temperature (normally maintaining below 70°C) and conduct regular vibration FFT analysis to identify early raceway micro-pitting before unexpected line halts occur.
To safeguard CHG Bearing HKG180AP0 against fretting wear and false brinelling during transport or vibration, assemble mating surfaces (457.2 mm x 508 mm) using anti-fretting mounting paste. Maintaining strict alignment and avoiding prolonged static vibration will preserve raceway polish.
